Lakka
A lightweight Linux distribution that turns a Raspberry Pi into a retro gaming console, based on LibreELEC and RetroArch.
About Lakka
Lakka is “a lightweight Linux distribution that transforms a small computer into a full blown retrogaming console”. It is based on LibreELEC and RetroArch.
Each image is built for one board: Pi 1 / Zero, Pi 2 / 3 (32-bit), Pi 3 / Zero 2 (64-bit), Pi 4 and Pi 5. There are also variants for composite video output and for cases such as the GPiCase, Retrodreamer and Pi Boy DMG; these are listed on the official download page.
Raspberry Pi compatibility for version 6.1
| Model | Status | Notes | Source |
|---|---|---|---|
| Raspberry Pi Zero family | No data | ||
| Raspberry Pi Zero | Supported | Image Lakka-RPi.arm; GPiCase variant available | Official download page |
| Raspberry Pi Zero 2 W | Supported | Image Lakka-RPi3.aarch64; GPiCase / GPiCase2W variants available | Official download page |
| Raspberry Pi 1 | Supported | Image Lakka-RPi.arm | Official download page |
| Raspberry Pi 2 Model B | Supported | Image Lakka-RPi2.arm | Official download page |
| Raspberry Pi 3 | Supported | Image Lakka-RPi3.aarch64 (or Lakka-RPi2.arm); composite variant available | Official download page |
| Raspberry Pi 4 Model B | Supported | Image Lakka-RPi4.aarch64; composite variant available | Official download page |
| Raspberry Pi 5 | Supported | Image Lakka-RPi5.aarch64; composite variant available | Official download page |
| Raspberry Pi 400 | No data | ||
| Raspberry Pi 500 family | No data | ||
| Compute Modules | No data | ||
| Compute Module 4 | Partially supported | Only images for specific cases: Retrodreamer, Pi Boy DMG, GPiCase2 | Official download page |
“No data” means we have no verified information – not that it does not work. Compatibility is taken from official or documented sources only.
Installation
Download the image for your board (the file name names the target hardware) and write it to a microSD card or USB drive. Then copy your games to the device, connect a gamepad and start it.
Releases
Sources
- Lakka: Raspberry Pi downloads (official) (retrieved November 20, 2026)
- Lakka documentation (retrieved November 20, 2026)
- Lakka releases on GitHub (retrieved November 20, 2026)
- Category
- Retro Gaming
- Image type
- Appliance image
- Architecture
- ARM32 – ARMv6, ARM32 – ARMv7 (armhf), ARM64 (AArch64)
- Project status
- Active
- Verification
- Verified from trusted source
- Last updated
- February 21, 2026
- Last checked
- November 22, 2026
- Listed since
- November 21, 2026