OctoPi
Raspberry Pi OS based SD card image with OctoPrint preinstalled, for controlling and monitoring 3D printers over the web.
About OctoPi
OctoPi is “a Raspberry Pi OS (and thus Debian) based SD card image for the Raspberry Pi that already includes OctoPrint plus everything you need to run it”. OctoPrint is a web interface for controlling and monitoring 3D printers.
The images listed here come from OctoPi-UpToDate, the official download: the latest OctoPi image with OctoPrint, kernel and bootloader already updated to the latest release. OctoPi itself is built by Guy Sheffer (github.com/guysoft/OctoPi).
Recommended hardware is the Raspberry Pi 3B, 3B+, 4B or Zero 2. Other compatible boards are not officially supported.
Raspberry Pi compatibility for version 1.1.0-2.0.1-20261118140631
| Model | Status | Notes | Source |
|---|---|---|---|
| Raspberry Pi Zero family | No data | ||
| Raspberry Pi Zero | Partially supported | Image compatible, but explicitly not recommended and not officially supported (Wi-Fi performance) | Official download page |
| Raspberry Pi Zero W / WH | Partially supported | Image compatible, but explicitly not recommended and not officially supported (Wi-Fi performance) | Official download page |
| Raspberry Pi Zero 2 W | Supported | Recommended | Official download page |
| Raspberry Pi 1 | Partially supported | Image compatible (1A, 1A+, 1B, 1B+), but not on the recommended hardware list | Official download page |
| Raspberry Pi 2 Model B | Partially supported | Image compatible, but not on the recommended hardware list | Official download page |
| Raspberry Pi 3 | Supported | 3B and 3B+ recommended; 3A+ compatible | Official download page |
| Raspberry Pi 4 Model B | Supported | Recommended (1/2/4/8 GB) | Official download page |
| Raspberry Pi 5 | Partially supported | Image compatible (4/8 GB), but not on the recommended hardware list | Official download page |
| Raspberry Pi 400 | Partially supported | Image compatible, but not on the recommended hardware list | Official download page |
| Raspberry Pi 500 family | No data | ||
| Compute Modules | No data |
“No data” means we have no verified information – not that it does not work. Compatibility is taken from official or documented sources only.
Installation
OctoPi is available in Raspberry Pi Imager under Other specific-purpose OS → 3D printing → OctoPi; choose the stable version. You can preset hostname, user, Wi-Fi and SSH in Imager. Do not format the SD card after installing, even if your computer asks you to.
Releases
| Version | Released | Type | Based on | Download |
|---|---|---|---|---|
| 1.1.0-2.0.1-20261118140631 | November 18, 2026 | Patch release | ||
| 1.1.0-2.0.0-20261116135331 | November 16, 2026 | Major release | ||
| 1.1.0-1.11.8-20260623094920 | June 23, 2026 | Minor release |
Sources
- OctoPrint: download page (official) (retrieved November 20, 2026)
- OctoPi-UpToDate on GitHub (license GPL-3.0) (retrieved November 20, 2026)
- Category
- Special Projects
- Image type
- Appliance image
- License
- GPL-3.0-only
- Project status
- Active
- Verification
- Verified from trusted source
- Last updated
- November 18, 2026
- Last checked
- November 22, 2026
- Listed since
- November 21, 2026