openHABian

Raspberry Pi OS based image that sets up the openHAB smart home platform automatically on first boot.

Verified Home Automation

About openHABian

openHABian is “the image to combine RaspiOS and openHAB on Raspberry Pi hardware”. It is based on Raspberry Pi OS Lite and is designed as a headless system: on first boot it downloads and configures openHAB and the related packages in their newest version.

The openHABian image supports all Raspberry Pi models. The 64-bit image is recommended and needs at least 2 GB RAM; openHAB 5 requires a 64-bit OS and Java 21. The 32-bit image is a fallback for older hardware and should only be used with openHAB 4.

Raspberry Pi compatibility for version 1.12.0b

ModelStatusNotesSource
Raspberry Pi Zero familyNo data
Raspberry Pi ZeroSupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi Zero W / WHSupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi Zero 2 WSupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi 1SupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi 2 Model BSupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi 3SupportedAll Raspberry Pi models are supported; with less than 2 GB RAM use the 32-bit image (openHAB 4)Official documentation
Raspberry Pi 4 Model BSupported64-bit image recommended (2 GB RAM or more)Official documentation
Raspberry Pi 5Supported64-bit image recommended (2 GB RAM or more)Official documentation
Raspberry Pi 400Supported64-bit image recommended (2 GB RAM or more)Official documentation
Raspberry Pi 500 familyNo data
Compute ModulesNo data

“No data” means we have no verified information – not that it does not work. Compatibility is taken from official or documented sources only.

Installation

Use Raspberry Pi Imager: Other specific-purpose OS → Home automation → openHAB, or download the image from the GitHub release and flash it. The project recommends an "Endurance" microSD card. The first boot takes some time while openHAB is installed.

Releases

VersionReleasedTypeBased onDownload
1.12.0bFebruary 1, 2026Patch release
1.12.0aJanuary 30, 2026Patch release
1.12.0January 18, 2026Minor release
1.11.0August 1, 2025Minor release
1.10.5July 30, 2025Patch release

Sources

Category
Home Automation
Image type
Appliance image
Architecture
ARM64 (AArch64)
Project status
Active
Verification
Verified from trusted source
Last updated
February 1, 2026
Last checked
November 22, 2026
Listed since
November 21, 2026